Open 24/7 · Greater Vancouver Licensed & Insured · Serving Vancouver since 1992 604-734-7233

Jeep Locksmith Vancouver

Automotive Locksmith/jeep keys, cut & programmed. In Vancouver, on site.

Key replacement, ignition repair, and all-keys-lost service for every Jeep model 2008+. On-site across Vancouver in 20-30 min from $180. Call 604-734-7233.

Call 604-734-7233
★ Licensed Vancouver shop · since 1992
Safe & Secure Locksmith technician programming a Automotive Locksmith/jeep car key in Vancouver
Safe & Secure Locksmith storefront at 4105 Macdonald Street, Vancouver
► What we do

Automotive Locksmith/jeep keys & fobs we handle.

Every Automotive Locksmith/jeep key type — cut and programmed by a licensed Vancouver locksmith. Tap a card for detail, or call for an urgent lockout.

01

Car Keys

New and spare Automotive Locksmith/jeep keys cut and programmed at your vehicle — laser-cut and edge-cut blades.

Tap for detail

We cut the mechanical blade to your Automotive Locksmith/jeep key code and program the chip to your immobiliser on site. Bring the car to the shop or we come to you.

Spare keysLaser cutOn-site
02

Fobs & Remotes

Dead or lost Automotive Locksmith/jeep remote? We supply and program remote head keys, smart keys and proximity fobs.

Tap for detail

New fob supplied, cut and paired to your Automotive Locksmith/jeep — remote-start and keyless-entry remotes included. We test lock, unlock and trunk before we leave.

Smart keysProximityRemote start
03

Transponder Keys

Chip key not starting your Automotive Locksmith/jeep? We diagnose, cut and program transponder keys that turn over first time.

Tap for detail

We read the Automotive Locksmith/jeep immobiliser, clone or program a fresh transponder, and verify a clean start — far cheaper than a dealer key and done the same visit.

Chip keysImmobiliserCloning
04

All Keys Lost

No working Automotive Locksmith/jeep key at all? We generate a key from scratch — no original needed.

Tap for detail

All-keys-lost is our specialty: we pull the key code, cut a new blade and program it to your Automotive Locksmith/jeep on site. No tow, no dealer wait.

No originalKey codeOn-site
05

Ignition Repair

Key stuck, worn or won’t turn in your Automotive Locksmith/jeep? We repair and rebuild ignition lock cylinders.

Tap for detail

Worn Automotive Locksmith/jeep ignition cylinders get repaired or replaced and re-keyed to your existing key — so you keep one key for doors and ignition.

Cylinder repairStuck keyRe-key
06

Locked Out / 24/7

Locked out of your Automotive Locksmith/jeep, or every key lost right now? We answer day and night.

Tap for detail

We dispatch immediately for Automotive Locksmith/jeep lockouts and emergency key replacement, with non-destructive entry wherever possible. Don’t break a window — call us.

LockoutsEmergency keys24/7

Jeep key replacement on-site — what to expect

We cut and program transponder keys, smart proximity keys, and remote fobs for every Jeep model from the late 1990s onward. On-site service runs $180-$420 depending on model and key type — older transponder keys at the lower end, newer smart keys at the upper end. You will need photo ID matching the registration plus the VIN; for all-keys-lost we also need ownership paperwork before we cut, since we are creating new credentials for the immobilizer.

How a mobile Jeep key cut works

First, a licensed automotive locksmith drives to your location anywhere in Vancouver — usually within 20-30 minutes — with a stocked Jeep blank kit. Then we read the VIN and immobilizer to identify the exact key and chip required. Next we cut the key blade on a code-cutter (or by decoding the lock cylinder if all keys are lost), then program the transponder or smart key to the immobilizer using OEM-protocol tooling. Finally we test ignition start, remote lock/unlock, panic, and trunk release before you drive away. Whole job: 30-45 minutes for transponder keys, 45-75 minutes for smart proximity keys, 60-90 minutes for all-keys-lost.

Common Jeep key issues we see in Vancouver

Jeep key fobs typically hit battery failure around the 3-year mark — quick CR2032 replacement, but if the fob will not pair afterward we re-sync it on-site. Older transponder keys can wear or crack at the head — replacement is straightforward and we cut from VIN. All-keys-lost on push-to-start models requires reading immobilizer data from scratch, which is the longest job — plan 60-90 minutes. For ignition issues (key sticks, will not turn), the cylinder usually needs a full replacement around 150,000+ km.
► Why drivers choose us

A real shop, not a dispatch number.

One licensed Vancouver team behind every Automotive Locksmith/jeep key — tap a check for another reason.

No tow to the dealer

We come to your Automotive Locksmith/jeep and cut and program the key on site — usually for a fraction of the dealer price.

All-keys-lost specialists

No working key? We generate one from the key code. Most Automotive Locksmith/jeep models, same visit.

Licensed since 1992

Bonded, insured and background-checked technicians working from a Vancouver shop — accountable, job to job.

Quoted before we start

A written price before any work begins — no surprise invoice. Give us the VIN and year for an exact figure.

► How it works

How a Automotive Locksmith/jeep key job runs.

Same process for a single spare or an all-keys-lost job.

02

We come to you

A licensed technician meets your Automotive Locksmith/jeep at home, work or the roadside across Vancouver.

03

Cut & programmed

We cut the blade and program the chip to your immobiliser, then test every function before we go.

04

Quoted up front

You get a clear price before any work starts. No surprise callout fees.

Licensed since 199224/7 dispatchNo tow to dealerUpfront pricing
► Service area

We cut Automotive Locksmith/jeep keys across Metro Vancouver.

From our shop on Macdonald Street to your driveway — Automotive Locksmith/jeep car keys, fobs and all-keys-lost right across Vancouver, and out to the rest of Metro Vancouver.

VancouverBurnabyRichmondSurreyNorth VancouverWest VancouverCoquitlamNew Westminster
More service areas
► Good to know

Automotive Locksmith/jeep key questions, answered.

How much does a Jeep key replacement cost?+
Transponder keys (most pre-2018 Jeep models) run $180-$240 on-site including cut + programming. Smart proximity keys for newer trims run $300-$420. Older mechanical-only keys are $80-$120 cut-only.
Can you cut a key from VIN if all keys are lost?+
Yes — we read your VIN, derive the key code from the Jeep database, cut a blade on-site, and program the transponder or smart key from scratch via the OBD port. Plan 60-90 minutes for all-keys-lost; the dealership takes 1-2 weeks and tows the car.
Do you program Jeep smart keys on-site?+
Yes. We carry blank Jeep smart fobs for current production models and program them on the spot using OEM-protocol tools. The dealer does not carry these blanks any faster than we do.
Will my insurance cover a lost Jeep key?+
Most ICBC comprehensive policies cover lost keys with a $300-$500 deductible. We provide an itemized invoice you can submit. For warranty/extended-warranty owners, check whether your plan includes key replacement before booking.
What if the immobilizer light keeps flashing after key programming?+
Usually one of three things: the key was not fully synced (we re-pair on-site), the fob battery is dead in a smart-key Jeep, or the immobilizer module itself has failed (rare — typically 250,000+ km). Diagnostic is included in the call-out.
Do you cover commercial fleets and Jeep ProMaster/work trucks?+
Yes. We do fleet key sets for Jeep ProMaster, Silverado/Sierra fleet trucks, and Ram ProMaster delivery vans. Volume pricing for fleets of 5+ keys; usually 20-30% off the per-key rate.
► Ready when you are

Jeep Key Replacement Vancouver. Call now.

Licensed, insured and mobile across Vancouver — Automotive Locksmith/jeep keys, fobs and all-keys-lost. Call now or book online, and skip the tow to the dealer.

604-734-7233