Skip to content

BMW Key & Fob Replacement Vancouver

BMW keys, cut & programmed. In Vancouver, on site.

Comfort Access fobs, diamond keys and all-keys-lost written straight into CAS3, CAS4 or FEM at your car. E, F and G chassis, 3 and 5 Series, X1 through X7, and the current electric models.

Call 604-734-7233

BMW key and fob replacement in Vancouver

A BMW key is not a blade with a chip glued to it. The credential lives in the CAS or FEM module and is tied to the ISN held by the engine controller, which is why a BMW key costs more than a Japanese one and why most shops send the car to the dealer. We do it at the kerb. European luxury keys, which is the band BMW sits in alongside Mercedes and Land Rover, are $400-$900 cut and programmed.

We are a licensed shop at 4105 Macdonald St, working since 1992, and we give you a real arrival time when you call. The published bands are on the price list. For makes outside the European group, the car key replacement page has the cheaper transponder and proximity figures.

BMW key facts at a glance

The module behind the key matters more than the model name.

  • EWSThe oldest system, on 1990s and early 2000s BMWs. Keys use the HU58 four-track or HU92 two-track blade.
  • CASCAS1 to CAS4 run from about 2002 to the mid-2010s. The key data lives in the CAS module, which we read to write a new key.
  • FEM and BDCOn F and G chassis cars the key is written through the FEM or BDC body module. Newer keys use the HU100R blade inside the fob.
  • Comfort AccessKeyless entry and start. If a Comfort Access fob is not detected, the cell is the first thing we test.
  • Check before bookingA few of the newest G-chassis builds still need a dealer key. We confirm by VIN before we quote, so you do not pay a call-out for a job we cannot finish.

Comfort Access fob

Comfort Access is the proximity system that unlocks the car as you reach for the handle and lets it start on the button. Replacing one is not a matter of cloning: the fob has to be written into the vehicle's key table, and the car has to accept it.

With a working fob in hand

We read the key table, add the new Comfort Access fob and verify start, central locking, boot release and the handle sensors. Your existing fobs keep working.

With no working fob

All keys lost means reading the CAS or FEM module and recovering the ISN from the engine controller before a virgin fob can be written. That is the long version of the job and it is the reason the European band exists.

Cracked diamond shells

The older diamond-shaped fob cracks at the seam. Where the electronics are intact we move them into a fresh shell instead of selling you a new key.

Cost by chassis

BMW pricing tracks the chassis and the module behind it, not the badge on the boot. Every figure below is published.

E chassis, CAS1 to CAS3

E90 3 Series, E60 5 Series, E70 X5. Blade key with the credential in CAS. European luxury key $400-$900 cut and programmed.

F chassis, CAS4 and CAS4+

F30 3 Series, F10 5 Series, F15 X5, F25 X3. Comfort Access fobs. Same $400-$900 band, longer on the all-keys-lost version.

G chassis, FEM and BDC

G20 3 Series, G30 and G60 5 Series, G05 X5, G07 X7, i4 and iX. Comfort Access written through FEM or BDC. $400-$900.

Spare beside a working fob

Booking a spare while one fob still works is always the cheaper path, because nothing has to be recovered from the car first.

Service call and after hours

$75 service call in standard hours. After-hours labour is $150 from 5 to 9 pm and $250/hour from 9 pm to 8:30 am.

BMW ignition and lock faults we see in Vancouver

E90 and E60 ignition switch failures are well documented and we replace them at the car rather than sending the vehicle in. On F and G chassis cars the start button is electronic, so a no-start is almost always the fob, the battery or a module, and diagnosing which one is the first thing we do. Lost X5 and X3 fobs from long-stay parking at YVR are a regular call, and they are handled as a virgin-key write rather than a tow. Cylinder work on the older cars sits on the ignition repair page.

Good to know

BMW key questions

Why does a BMW key cost more than most?+
The key is written into the CAS, FEM or BDC module, and Comfort Access fobs cost more to supply. Our published band is $400-$900, and we quote the exact figure from the VIN.
My BMW key is not detected. Is it broken?+
Start with the fob cell. If a new cell does not fix it, we test the fob and the car before recommending a replacement.
Can you do a key for every BMW?+
Most E and F chassis cars, and most G chassis cars. A few of the newest builds still need a dealer key, which we tell you before booking.
Ready when you are

Need a BMW key in Vancouver? Call now.

Call 604-734-7233 with the chassis code or the year and model. We confirm whether it is a CAS, CAS4 or FEM job and quote before dispatch.

604-734-7233
lınq Websites, bookings, dispatch, marketing for small businesses. LINQSYSTEM.COM Create yours →