Safe & Secure Locksmith · Greater Vancouver

IGNITION REPAIR VANCOUVERMOBILE. ON-SITE. ALL MAKES & MODELS.

Ignition won't turn? Key stuck or snapped off? Our automotive locksmiths diagnose and repair ignition cylinders on-site across Greater Vancouver. No towing, no dealership — we come to you 24/7.

Call 604-734-7233 Book Ignition Repair30+Years Experience24/7Emergency Service20–30Minute ResponseAllMakes & Models

Ignition Repair Vancouver

Your Ignition Won't Turn? We Fix It On-Site.

A failing ignition cylinder can leave you stranded. Whether the key is stuck, the cylinder won't turn, or the ignition switch has failed electrically, our licensed automotive locksmiths diagnose and repair the problem at your vehicle.

We carry replacement cylinders, wafer kits, and electronic diagnostic tools for all major car brands. Most ignition repairs are completed in under an hour, right where your vehicle is parked.

On-site ignition cylinder repair and replacement
Broken key extraction from ignition
Worn wafer replacement and rekeying
Electronic ignition switch diagnosis
Push-to-start system troubleshooting
New key cut to match repaired ignition

🔒

Key Won't Turn

Worn wafers inside the cylinder stop recognising the key. We replace the wafers or the full cylinder and cut a new key to match.

⚠️

Key Stuck in Ignition

A broken spring or misaligned wafer traps the key. We extract it without damage and repair the cylinder so it doesn't happen again.

🚫

Ignition Won't Start the Car

The cylinder turns but the car won't start. This can be an electrical ignition switch fault or an immobilizer issue. We diagnose both on-site.

🔄

Key Snapped Off Inside

A broken key stuck in the ignition is a common emergency. We extract the broken piece, then cut and program a new key on the spot.

Ignition Repair by Brand

Select Your Car Brand. Brand-Specific Expertise.

Every car brand has different ignition systems. Select yours for brand-specific information on ignition repair, key replacement, and all-keys-lost service.

How It Works

Ignition Repair in 4 Steps. No Towing Required.

Call Us

Call 604-734-7233 or book online. Describe the problem and your vehicle details.

We Diagnose On-Site

A licensed technician arrives at your vehicle, typically within 20–30 minutes. We diagnose the exact cause of the ignition failure.

Repair or Replace

We repair the cylinder, replace worn wafers, or swap the full ignition assembly — whatever the diagnosis requires. All done at your vehicle.

New Key & Test

If needed, we cut a new key to match. We test the full system — ignition, steering lock, immobilizer — before leaving.

⭐ 30+ Years Experience🔐 Licensed & Insured🚗 Mobile On-Site Service📍 Greater Vancouver🌙 24/7 Emergency💬 Upfront Pricing

Book Service

Book Ignition Repair. We Come to You.

Fill in your details and we'll confirm your appointment. For urgent ignition problems, call 604-734-7233 directly.

First Name *

Last Name *

Phone Number *

Email Optional

Address Optional

City Optional

Preferred Date Optional

Select date…

Preferred Time Optional

Select time…

Early Bird (8am–11am)

Mid-Morning (11am–2pm)

Afternoon (2pm–5pm)

Late Afternoon (5pm–8pm)

Evening (8pm–11pm)

Night Owl (11pm–12am)

After Hours (12am+)

Service Needed *

Select a service…

Emergency Locksmith

Commercial Locksmith

Automotive Locksmith

Residential Locksmith

Safes

Door Repair

Lockout Service

Call Now

We'll confirm your appointment by phone. No spam, ever.

Ignition Repair FAQ

Common Questions. Honest Answers.

The cost depends on the vehicle and the nature of the problem. A simple wafer replacement is less expensive than a full ignition cylinder swap. We provide an exact quote after on-site diagnosis, before any work begins.

In many cases, yes. If the cylinder is structurally sound and the issue is worn wafers, we can replace just the wafers and rekey the cylinder. This is faster and cheaper than full replacement. We'll always try the least invasive repair first.

Yes. A stuck key is usually caused by a worn wafer or broken spring inside the cylinder. We extract the key without damage to the key or cylinder, then repair the underlying issue so it doesn't happen again.

It depends. If we rekey the cylinder or replace it, a new key is cut to match. If the repair is to the switch or electrical system, your existing key will still work. We'll let you know before starting.

Yes. Push-to-start issues are typically related to the key fob battery, antenna ring, or start button itself. We diagnose the specific fault and repair or replace the faulty component on-site.

Most ignition repairs take 30 to 90 minutes depending on the vehicle and the nature of the problem. We work at your vehicle so there's no shop time or waiting around for a tow.

Ready to Help

Ignition Problems? We Fix Them On-Site.

Available 24/7 for ignition repair, key extraction, and ignition replacement across Greater Vancouver. Call now or book online.

Call 604-734-7233 Contact Us